Tag Archives: runoffgroove.com

ROG Ginger V1.0 – DIY

This is my PCB for runoffgroove’s Ginger bass amp emulation. Here is the link to ROGs project and their soundfiles. The Ginger is modelled after an Ampgeg SB-12 Portaflex bass amp. Board mounted pots can be used to make the build easier. PCBs based on runoffgroove circuits purchased from TH custom effects are intended for DIY / non-commercial […]

ROG Azabache – DIY

This is my PCB for runoffgroove’s Azabache overdrive. Here is the link to ROGs project and their soundfiles. The Azabache is a Fender-like overdrive covering a lot of their models because of the special tonestack and switching used. Board mounted pots can be used to make the build easier. For reference: (out of production)

ROG Supreaux-Deux V1.1/1.3 – DIY

This is my PCB for runoffgroove’s Supreaux-Deux overdrive. Here is the link to ROGs project and their soundfiles. The Supreaux Deux is moddeled after a single ended SUPRO 16T. Board mounted pots can be used to make the build easier. V1.3 has a smaller layout and testpoints added to make biasing the JFETs easier. Older […]

ROG Condor – Cabinet Simulation – DIY V1.1

This is my PCB for runoffgroove’s Condor cabinet simulation. Here is the link to ROGs project and their soundfiles. In my opinion ROGs Condor is one of the best available cabinet simulators. It emulates a speaker cabinet and allows direct recording or listening via a headphone amp. The PCB has the M-modification as explained in […]

ROG Umble V1.0/1.2/1.3/1.4 – DIY

This is my PCB for runoffgroove’s Umble overdrive. The circuit has been altered to have less gain. The original had way too much for my liking. Listen to the soundfiles! Here is the link to ROGs project and their soundfiles. The Umble is modelled after one of the famous Dumble amps. Board mounted pots can […]

ROG Thor modified V1.2 – DIY

This is my PCB for runoffgroove’s Thor overdrive. Here is the link to ROGs project and their soundfiles. The Thor is modeled after a Marshall 100W super lead amp. This circuit enhances the original build by adding a Bandaxall tonestack and a lead-channel-mod. Board mounted pots can be used to make the build easier. V1.1 […]