Category Archives: slideshow

DIY, slideshow

OD 67 Overdrive – DIY

Posted on by TH custom effects
16
Dec
[wpdm_file id=76] This is based on a DOD 250™/ MXR Dist+  overdrive which is a straight-to-the point distortion unit. In addition to that Brian Wampler has written a nice article in premierguitars which discussed a lot of modifications to optimize the circuit http://www.premierguitar.com/articles/mxr-distortion-plus-mods-1 Those mods are switchable on the OD67 board. The most usefull one […]
Continue reading →
Development, DIY, slideshow

PControl Modular – The next generation DIY looper

Posted on by TH custom effects
25
Nov

Since I have discontinued the PControl Looper I have received so many requests to as when the new PControl will be available that I cannot count them. Here is the documentation of the development of the new device and my thoughts – based on a lot of feedback and wishes I have received since I […]

Continue reading →
DIY, slideshow

Dr. Phil Compressor – DIY

Posted on by TH custom effects
06
Oct
[wpdm_file id=61] This is a well known circuit which features a versatile compressor together with a nice dirt section. The optical compressor circuit can be blended in with the original signal. The compressed signal can additionally be blended with its overdriven signal. Some words about the controls: There are mixed reactions when people are confronted […]
Continue reading →
DIY, slideshow

ROG Ginger V1.0 – DIY

Posted on by TH custom effects
19
Apr
[wpdm_file id=53] This is my PCB for runoffgroove’s Ginger bass amp emulation. Here is the link to ROGs project and their soundfiles. The Ginger is modelled after an Ampgeg SB-12 Portaflex bass amp. Board mounted pots can be used to make the build easier. PCBs based on runoffgroove circuits purchased from TH custom effects are intended for DIY […]
Continue reading →
DIY, slideshow

ROG Azabache – DIY

Posted on by TH custom effects
07
Jan
[wpdm_file id=56] This is my PCB for runoffgroove’s Azabache overdrive. Here is the link to ROGs project and their soundfiles. The Azabache is a Fender-like overdrive covering a lot of their models because of the special tonestack and switching used. Board mounted pots can be used to make the build easier. For reference: (out of […]
Continue reading →
DIY, slideshow

The EPIC Looper V1.0 DIY

Posted on by TH custom effects
04
Dec
[wpdm_file id=39] [wpdm_file id=43] [wpdm_file id=42] This is a cooperation between JMK PCBs and TH custom effects. We aimed for an easy-to-use and no-nonsense version of a programmable DIY true-bypass looper. And here it is: Features: True Bypass relay system Stores 4 banks of 5 presets each (thats 20 presets in total) Manual-Mode – toggle […]
Continue reading →
DIY, slideshow

Pro-cessor V3.0/V4.0/V4./V4.2 & Mixer/Splitter – DIY

Posted on by TH custom effects
03
Dec
[wpdm_file id=75] This is version 4.2 of the Pro-cessor. Signal Splitter Signal Mixer two effect loops 24dB highpass and lowpass filters affecting the signals V3.0 version (no board mounted jacks) is back in stock for everyone who wants to do his own wiring!   V4.0 features everything board mounted fitting in a 1590B enclosure. It […]
Continue reading →
DIY, slideshow

Acoustic Simulator V1.0/V1.1 – DIY

Posted on by TH custom effects
11
Sep

Version 1.1: [wpdm_file id=48] Version 1.0: [wpdm_file id=35] Cool, what does it do? It enables you to play acoustic guitar on your gig without taking one with you. This circuit is known as Mark Hammers “Woody” and well recognized in the DIY area. Version 1.1 has a new layout which includes additional filter caps.

Continue reading →